The SPANCO ALU-TRACK bridge is a lighter weight yet durable alternative for the construction of any SPANCO Workstation Bridge Crane, Workstation Bridge, Monorail Systems or Fall Protection System that require smooth, quiet movement. Best of all, an aluminum-built SPANCO ALU-TRACK bridge is maintenance free, spark resistant and will not corrode. SPANCO ALU-TRACK is also available for Workstation Bridge Crane runways which used in coordination with an ALU-TRACK bridge provides a complete ALU-TRACK system.
Features
ALU-TRACK Cranes are lightweight, maintenance-free and ergonomic monorail applications suitable for use in controlled environments such as refrigeration areas and clean rooms.
SPANCO ALU-TRACK bridges are ideal for:
- Clean rooms
- Food packaging applications
- Moisture rich environments
- Acid environments (not recommended for base/alkaline environments)
- Research and development labs
SPANCO manufactures 3 models of ALU-TRACK systems:
306 ALU-TRACK Ceiling Mounted Workstation Bridge Crane
(shown in photo gallery)
- 6"Aluminum Track
- 250-1000lb. Capacities – The capacity reduces with length of span.
- Most economical size available for light loads and short spans on Workstation Bridge Cranes
- Extruded from 6061-T6 aluminum alloy
- ALU-TRACK design is light but durable and allows for ease of alignment for a smooth rolling surface
- Internal tapered track provides self-centering of the trolley and end trucks and is the same internal dimensions as the 600 series Workstation Bridge Crane steel track profile.
- ALU-TRACK design allows for ease of hanger location along the length of the track.
- See chart for maximum loading & span capabilities
308 ALU-TRACK Ceiling Mounted Workstation Bridge Crane
(shown in photo gallery)
- 8" Aluminum Track
- 500-3000lb. Capacities – The capacity reduces with length of span.
- ALU-TRACK section is deeper and allows for heavier loads and longer span requirements on bridge crane
- Extruded from 6061-T6 aluminum alloy
- Track design allows for ease of alignment for a smooth rolling surface
- Internal tapered track provides self-centering of the trolley and end trucks and is the same internal dimensions as the 700 series Workstation Bridge Crane steel track profile.
- ALU-TRACK design allows for ease of hanger location along the length of the track.
- See chart for maximum loading & span capabilities
Reinforced 308 ALU-TRACK Ceiling Mounted Workstation Bridge Crane with Reinforced 8" Aluminum Track (shown in photo gallery)
- 1000-3000 lb. Capacities – The capacity reduces with length of span
- ALU-TRACK section is established using the standard 8" track and installing an extruded strong-back to increase the height of the track to 12 1/2"
- Reinforced 8" track handles heavier loads at longer spans on workstation bridge crane
- Both the track & strong-back are extruded from 6061-T6 aluminum alloy
- ALU-TRACK design allows for ease of alignment for a smooth rolling surface
- Internal tapered track provides self-centering of the trolley and end trucks and is the same internal dimensions as the 700 series Workstation Bridge Crane steel track profile.
- ALU-TRACK design allows for ease of hanger location along the length of the track and eliminates the need to cope the end of the bridge in order to mount the end trucks.
- See chart for maximum loading & span capabilities
IMPORTANT NOTE:
SPANCO ALU-TRACK systems are designed not to exceed deflection of 1/450 of span in accordance with ANSI B30.11, Monorails and Underhung Cranes.
ALU-TRACK is extruded from high strength 6061-T6 aluminum alloy and designed in accordance with MMA MH27.2, Standard for Enclosed Track.
Resources
The following resources are available:
Case Studies
- At this point, no case studies have been added to this product.
Please check back at a later time. Thank you.
Videos
Click on video to play
-
SPANCO ALU-TRACK Workstation Bridge - Welding Application
2 MB