Wide Flange Gantry Cranes
Capacities: up to 15 tons
Height under I-beam: up to 35’
Spans: up to 55’
Made for extra strength, rigidity, and durability, Spanco Wide Flange Gantry Cranes are custom-engineered lifting solutions for CMAA Class C or D Service, or for applications requiring a longer span or heavier capacity than a standard gantry crane.
Spanco Wide Flange Gantry Cranes are ideal for applications that require:
- Supplemental lifting systems that free up your existing large overhead cranes.
- Wide, clear passage underneath the gantry for machinery, vehicles, and personnel.
- CMAA Class C, Moderate Service: A lifting system that requires no floor tracks (or, for single leg designs, no angle guides). Uses polyurethane wheels for maximum traction directly on floor. Quiet operation and speeds up to 80 FPM.
- CMAA Class D, Heavy Service: Single or Double Leg Gantry cranes using double-flange wheels on an ASCE rail; speeds up to 150 FPM. (Limitations over 10 tons may apply.)
Exacting End Truck Designs
Our end trucks deliver smooth start-ups, stable movement, and precision wheel alignment for even transfer of power to all wheels.
- Floor-contact end trucks use large diameter tread wheels for excellent traction.
- End trucks for ASCE rail have guide rollers and anti-kick-up rollers to keep them securely aligned against both sides of the track’s flange.
- Rotating axles allow easy servicing of wheels, axles, and bearings.
Options for Spanco Wide Flange Gantry Cranes
- Multi-speed AC inverter drives
- Motor brakes
- Air drives
- Push-button station controls
- Warning lights, audible alarms, flood lights, or travel limit switches
- Top running or under running end trucks (for semi-gantries)
- Designs for severe environments or hazardous areas
- Special paint finishes
There are no case studies for this product. View all case studies for Spanco crane systems.
Products covered under the Ten-Year Warranty:
- Manual Steel Freestanding, Ceiling Mounted Workstation Bridge Cranes, and Monorails
- Manual Aluminum (Alu-Track®) Workstation Bridge Cranes and Monorails
- Manual Jib Cranes (I-Beam, Articulating, and Workstation Jib Cranes)
- Manual Gantry Cranes and Tripods
What the Ten-Year Warranty covers:
- Defects in equipment material and workmanship
- Wearable parts (workstation bridge crane end trucks and hoist trolley wheels only)
Spanco, Inc. warrants its manual workstation bridge crane products, jib crane products, and gantry crane products to be free from defects in material and workmanship for a period of ten (10) years or 20,000 hours, commencing on the date of shipment to the first retail purchaser. This warranty extends to non-wearable parts only, with the exception of the wheels supplied on manually operated workstation end trucks and hoist trolleys. This warranty does not cover defective equipment or system failure caused by misuse, negligence, improper installation or maintenance, or equipment that has been used in excess of its rated capacity or beyond its service factors. It does not apply to equipment that has been altered without Spanco’s written authorization.
Written notice of any claimed system defect must be given to Spanco within thirty days of discovery. Spanco's obligation under this warranty is limited to the replacement or repair of Spanco’s products at the factory or separate location approved by Spanco. The purchaser is responsible for all freight and transportation costs relating to equipment repair or replacement. Other than the abovementioned warranty, Spanco will not honor any other warranties—whether express, implied, or statutory—and disclaims any warranties of merchantability or fitness for a particular purpose. Spanco is not liable—under any circumstances—for any indirect, incidental, or consequential damages including but not limited to lost profits, increased operating costs, or loss of production.
This warranty does not extend to components or accessories not manufactured by Spanco. The purchaser’s remedy for such components and accessories will be determined by the terms and conditions of any the warranty provided by the manufacturer of such components and accessories.
NOTE: All motorized Spanco products come with a One-Year Warranty on drive components.
General Design Standards:
Spanco cranes are designed in conformance with the following applicable standards:
- Workstation Bridge Cranes: AISC Steel Construction Manual, OSHA 1910.179, ANSI B30.11, AWS D1.1/D1.6, and MMA MH27.2
- Gantry Cranes: AISC Steel Construction Manual, OSHA 1910.179, ANSI B30.11, AWS D1.1/D1.2/D1.6, and CMAA 74
- Jib Cranes: AISC Steel Construction Manual, OSHA 1910.179, ANSI B30.11, AWS D1.1/D1.6, and CMAA 74
All Spanco cranes have a design factor of 15% of the allowable capacity for the weight of the hoist and 25% for impact.
All welding performed during the manufacturing of Spanco cranes meets the American Welding Society’s (AWS) D1.1/D1.2/D1.6 Standards.
Spanco, Inc. is officially certified as an AWS Certified Welding Fabricator (CWF). This means that not only are all welders AWS Certified, but all processes and procedures adhere to AWS CWF requirements. Examples of requirements include annual calibration of all welding machines and Level 2 visual inspections on all load-bearing components.
All steel used in the manufacturing of Spanco cranes meets the following applicable ASTM International specifications:
Structural Steel Shapes: ASTM A-36
Structural Steel Pipes: ASTM A-53
Structural Steel Tubing: ASTM A-500
Steel plate and round bar used in Spanco cranes have minimum yield strengths of 36 KSI.
Surface Preparation & Painting Procedures:
Spanco adheres to the standards of the Society for Protective Coatings (SSPC) for all product surface preparation. Prior to painting, all Spanco crane components are deburred and descaled using power tools equipped with sanding discs and wire wheels. Components are then washed utilizing a high-pressure/high temperature biodegradable degreaser solution. Parts are wiped clean and allowed to dry before the painting process. During painting, all components surfaces are coated with a quick drying, semi-gloss enamel, applied to a minimum dry-film thickness of 2 to 3 mils. A finishing coat is applied with a hot, airless, electrostatic spray paint system. Painted components are cured at air temperature.
The following guidelines for deflection and stress are followed by Spanco engineers during the crane design process:
- Workstation Bridge Cranes: All models designed to L/450
- Jib Cranes: Wall-Mounted Cantilever (300 Series) models designed to L/150, Freestanding (100, 101, and 102 Series), Mast Style (200 Series), and Wall-Mounted Bracket (301 Series) models design to L/450
- Workstation Jib Cranes: Wall-Mounted (WC Series) models designed to L/225, Freestanding (FR Series) models designed to L/150
- Gantry Cranes: All steel series models to L/600, Aluminum models to L/450
Spanco, Inc. is an ISO 9001-2008 Registered corporation. This means that Spanco cranes are manufactured to standards ensuring safety, reliability, and the highest quality. Spanco, Inc.’s ISO designation also allows for continuous improvement based on customer feedback.
- Inspect entire system annually or more frequently as defined by OSHA 1910.179. Inspection must be performed by a qualified person. Failure to do so may cause serious injury or death.
- This equipment, used as a crane, is not in any way designed for lifting, supporting, or transporting humans. Failure to follow specified load limitations can result in serious bodily injury or death.
- Inspect gantry for missing or broken parts before operating.
- Ensure the rated capacity is clearly labeled on each side of the I-beam.
- Do not lift more than the rated capacity.
- Do not adjust or disassemble crane when gantry is under load.
- Do not load gantry on an incline.
- Do not push or pull gantry with a forklift or other vehicle.
- Do not allow the load to swing or roll against support members.
- Do not anchor legs to the floor.
- Do not lift gantry when fully assembled.
- Push the gantry, not the load.
- When moving gantry, keep load as close to the floor as possible and position the load in the center of the I-beam.
- Be certain the load is directly beneath beam before load is lifted. Do not pull sideways on crane.
- Ensure the load is not attached to the floor and remove any obstacles that impede lifting.
- Adjustments and/or repairs should be made in an area where it will have the least interference with operation.
- Never stand under gantry when disassembling crane.